3S技术应用现状与发展趋势

3S技术出现至今,已在诸多领域成功运用并产生了巨大的价值。文章简单介绍了3S三大组成部分:GIS、RS、GNSS的基本概念,分析了3S技术目前在农业、生态环境监测、土地资源管理以及智慧城市方面的应用现状以及对其在该方面未来的发展趋势进行展望。最后对目前3S在应用中遇到的一些问题进行了探讨,给未来3S技术的发展提供一些参考。     

Gas Responsive Nanoswitch: Copper Oxide Composite for Highly Selective H2S Detection

A nanocomposite material based on copper(II) oxide (CuO) and its utilization as a highly selective and stable gas‐responsive electrical switch for hydrogen sulphide (H₂S) detection is presented. The material can be applied as a sensitive layer for H₂S monitoring, e.g., in biogas gas plants. CuO nanoparticles are embedded in a rigid, nanoporous silica (SiO₂) matrix to form an electrical percolating network of low conducting CuO and, upon exposure to H₂S, highly conducting copper(II) sulphide (CuS) particles. By steric hindrance due to the silica pore walls, the structure of the network is maintained even though the reversible reaction of CuO to CuS is accompanied by significant volume expansion. The conducting state of the percolating network can be controlled by a variety of parameters, such as temperature, electrode layout, and network topology of the porous silica matrix. The latter means that this new type of sensing material has a structure‐encoded detection limit for H₂S, which offers new application opportunities. The fabrication process of the mesoporous CuO@SiO₂ composite as well as the sensor design and characteristics are described in detail. In addition, theoretical modeling of the percolation effect by Monte‐Carlo simulations yields deeper insight into the underlying percolation mechanism and the observed response characteristics.     

Preparation and characterization of multilayer Gd2O2S:Tb phosphor screen for X-ray detection application

Gd2O2S:Tb (GOS) phosphor screen, generally with a multilayer structure, has been widely used in digital X-ray imaging. GOS phosphor screen is fabricated via a slip casting route, which is an effective method to obtain multilayer composites with good strength. The GOS slurry was prepared using the menhaden oil, polyvinyl butyral and PEG-400 as dispersant, binder and plasticizer, respectively, and slip casted on a support layer. After the GOS scintillation layer is formed, a transparent polyethylene terephthalate film is covered on it as a protective layer. The X-ray excited emission spectra of the obtained GOS phosphor screen is well match to the spectral response of a-Si:H photodiode, and the spatial resolution was close to 3.7 LP/mm, which could meet the request of the commercial application.     

某含锌锡多金属硫化矿石锌浮选试验研究

某含锌锡多金属硫化矿石Zn、Sn、Fe、S含量分别为6.04%、1.05%、29.33%、19.08%，锌主要以铁闪锌矿、闪锌矿的形式存在，锡主要以锡石的形式存在，铁主要以黄铁矿、磁黄铁矿等形式存在，其中的金属矿物共生关系密切，相互包裹现象普遍。为确保不影响后续选锡，对锌浮选流程进行了试验研究。结果表明：矿石在磨矿细度为-0.074 mm占80%的情况下，采用预先脱硫—锌硫混浮再分离流程处理，在选择硫酸铜为锌矿物活化剂、丁基黄药为捕收剂、松醇油为起泡剂、石灰为黄铁矿抑制剂的情况下，经1段脱硫、2粗1扫锌硫混浮、1粗2精锌硫分离，锌硫分离精选尾矿与锌硫混浮扫选精矿2次精选后锌硫分离，最终获得锌精矿Zn品位47.06%、回收率90.76%，试验指标良好。     

一种磁控管用扼流线圈仿真设计

采用电路仿真软件仿真滤波组件S参数曲线,观察曲线随器件参数的变化;介绍利用三维全波电磁仿真软件HFSS简化设计流程的方法,并与测试结果对比。结果表明:利用3D仿真软件在满足器件设计精度的同时可以简化线圈的设计流程。     

Characterization of the microbiota and resistome of bulk tank milk samples from Prince Edward Island dairy farms

Bulk tank milk (BTM) is regularly used for surveillance on dairy farms for disease conditions such as mastitis and Johne's disease. In this study, we used 16S rRNA sequencing and bait-capture enrichment to characterize the microbiota and resistome of BTM, and investigate potential differences between the cream or pellet fractions. A total of 12 BTM samples were taken from 12 Prince Edward Island dairy farms, in Atlantic Canada, in duplicates. The DNA was analyzed by high-throughput sequencing of the 16S rRNA gene and a suite of antimicrobial resistance (AMR) genes. Target-capture enrichment of AMR genes was conducted before shotgun sequencing. The bioinformatics pipelines QIIME 2 and AMR++ were used for microbiota and resistome analysis, respectively. Differences between microbiotae were evaluated qualitatively with nonmetric multidimensional scaling and quantitatively with permutational ANOVA of UniFrac distances. A total of 47 phyla were present across the BTM samples. Firmicutes, Bacteroidetes, Proteobacteria, and Actinobacteria were the most abundant phyla. At the genus level, Corynebacterium, Acinetobacter, Lactobacillus, and Turicibacter were the most abundant. There was no significant difference in the Faith's phylogenetic diversity between the cream and pellet fraction. Faith's phylogenetic diversity differed marginally by stall type. There were 10,217 hits across 80 unique AMR genes, with tetracycline resistance being the most common class.     

Predominant yeasts in the sourdoughs collected from some parts of Turkey

In the present study, a total of eight sourdough samples were collected from three different bakeries at two different times in Turkey. Also, laboratory-scale sourdough production was conducted by daily back-slopping for 7 days. Microbiological and chemical properties of the sourdoughs were investigated. Yeast species in the sourdoughs were identified by subjecting all presumptive yeast cultures to internal transcribed spacer region amplification of the 5.8S rRNA gene, restriction fragment length polymorphism analysis using Hae III, Hha I, and Hinf I endonucleases, and sequence analysis of the D1/D2 domain of the 26S rDNA gene. A total of seven profiles were determined according to the restriction fragments. Totally, 148 yeast isolates were identified at the species level (≥400 bp , 99% identity) as Saccharomyces cerevisiae (106), Kazachstania bulderi (11), Pichia fermentans (nine), Pichia membranifaciens (eight), Kazachstania servazzii (seven), Kazachstania unispora (four), and Hanseniaspora valbyensis (three). Although collected sourdoughs were produced without using baker's yeast, S. cerevisiae was the most frequently isolated yeast species. This can be related to the contamination of the bakery environment with commercial baker's yeast during the production of other bakery products. The pH and acidity levels of the collected sourdough samples ranged from 3.71 to 3.96 and 6.78 to 23.93 mL 0.1 N NaOH/10 g dough, respectively. Mean values of the content of maltose + sucrose, glucose, fructose, lactic acid, and acetic acid were 2.43, 1.57, 2.67, 7.30, and 1.40 g/kg, respectively. Due to the artisan and region-dependent handling of the sourdough, different biochemical patterns were observed among the collected samples.     

Comparative study of the phenolics,antioxidant and metagenomic composition of novel soy whey-based beverages produced using three different water kefir microbiota

Water kefir microbiota was used to develop novel soy whey-based beverages that have antioxidant activity. In the present study, comparative phenolics, antioxidant and metagenomic composition of the soy whey beverages fermented using three different water kefir microbiota, named WKFS-A, WKFS-B and WKFS-C were investigated. WKFS-B beverage had the highest concentrations of isoflavone aglycones (208.73 ± 2.78 mg L⁻¹) and phenolic acids (132.33 ± 3.41 mg L⁻¹) compared with WKFS-A (193.88 ± 1.15 mg L⁻¹) and (91.73 ± 2.34 mg L⁻¹) and WKFS-C (160.63 ± 1.76 mg L⁻¹) and (97.13 ± 2.63 mg L⁻¹), respectively. The WKFS-B also showed higher DPPH and ABTS radical scavenging activity and ferric reducing antioxidant power compared with WKFS-A and WKFS-C beverages. Microbial species diversity index analysis showed that a higher concentration of isoflavone aglycones, phenolic acids and increased antioxidant activity in the WKFS-B beverage correlates with the higher relative abundance of Lactobacillus genus. This study thus revealed that Lactobacillus dominated water kefir microbiota produces soy whey beverages with high phenolic acids, isoflavone aglycones and antioxidant activity.     

煤矿科室工作信息管理系统设计

为了提高了煤矿工作者的工作效率和矿井安全程度，设计了煤矿科室工作信息管理系统，分析了系统的关键技术，主要为J2EE技术和B/S和C/S的体系结构；根据现场调研，对系统需求进行了分析，然后设计了系统总体架构和系统功能模块。煤矿科室工作信息管理系统的应用，减少了人力资源的浪费，确保了信息的保存和查询的安全性。     

Microstructural characterization of plasma sprayed Ln2Zr2O7 thermal barrier coatings by electron microscopy methods

The presented article characterized microstructural aspects of thermal barrier coatings (TBCs) analysis using methods of electron microscopy such as electron backscatter diffraction (EBSD), transmission/scanning electron microscopy (S/TEM), and TEM. The analyzed TBC system is based on gadolinium zirconate deposited by air plasma spraying method, and additionally, it was subjected to an oxidation test for 500 hr at a temperature of 1,100°C. Moreover, the morphological characterization of feedstock powder was showed. EBSD analysis revealed the inhomogeneity of feedstock materials in the form of complex phase composition. In the case of deposited coating, this method was used to characterize the crystallite size of zirconate coating and phase composition of thermally grown oxide zone. S/TEM and TEM analysis showed morphological details of this zone but not revealed such phase as perovskite oxide of GdAlO₃ type.